Using a barrier between a flower garden, sidewalk, or other landscaped area to prevent grass and weed growth provides a nice change. There are a couple of options in the type of material used. There are both composite and plastic bender board. The composite is great but deteriorates over time and becomes part of the soil. You may have to replace it after a few years to continue having that barrier. With the plastic option, you are using a material that will not break down or need to be replaced. It is usually made from environmentally conscious recycled plastics that would have gone to the landfill.
Wood fibers and glue are used to make the composite borders. They retain some flexibility but may be a bit harder to work with. Often you will use water to help shape them. The nice thing about them is that they deteriorate over time. If you aren't wanting this to be a permanent solution, this is the way to go. They'll naturally rejoin the soil over a matter of years.
The other type is made from recycled plastic. This helps the environment by keeping it out of the landfill and putting it to good use. Being plastic, it will be able to last a very long time and you won't need to replace it. Plus, if you decide to move the border and redo some of the landscaping, you can dig it up and use it again.
There is not much difference in how you install them. Measuring how much you need takes a bit of ingenuity. Put a stake in the ground at every turn and use a string to measure how much you need. If you want, add a little material length since you can easily cut off what you don't need.
Dig the trench and put stakes in to hold the board. The trench needs to be six inches wide and deep enough to cover the material. Leave the dirt nearby to fill in when you're near the last step. Place the stakes at intervals but on the side away from the grass or turf. Two stakes will be needed in places where there will be a break in the material, but the second one can be put in later when you know where the break will be.
Place the border in the trench. This step is pretty easy and straight forward. You want the material on the turf side. You'll then attach the material to the stakes to hold it down and in place. If you find spots where the border sticks up above the grass line, dig some dirt out to make it sit slightly below.
Fill in the dirt. This is why you want to keep the dirt near where you dug the trench. You'll be able to just push it over and fill in the area and cover the board. You shouldn't worry if the dirt sticks up a bit but do try to pack it down with your foot or a packer tool. Once it is settled you can add decorative rocks or other border material to make it look nice.
It's not hard to make a nice border to keep the weeds from growing into the flower bed or decorative rocks. After you've dug the trench and put in the border, you'll be well on your way to creating a great looking landscaped yard. Having a border between areas is essential to keeping it looking great over time.
Wood fibers and glue are used to make the composite borders. They retain some flexibility but may be a bit harder to work with. Often you will use water to help shape them. The nice thing about them is that they deteriorate over time. If you aren't wanting this to be a permanent solution, this is the way to go. They'll naturally rejoin the soil over a matter of years.
The other type is made from recycled plastic. This helps the environment by keeping it out of the landfill and putting it to good use. Being plastic, it will be able to last a very long time and you won't need to replace it. Plus, if you decide to move the border and redo some of the landscaping, you can dig it up and use it again.
There is not much difference in how you install them. Measuring how much you need takes a bit of ingenuity. Put a stake in the ground at every turn and use a string to measure how much you need. If you want, add a little material length since you can easily cut off what you don't need.
Dig the trench and put stakes in to hold the board. The trench needs to be six inches wide and deep enough to cover the material. Leave the dirt nearby to fill in when you're near the last step. Place the stakes at intervals but on the side away from the grass or turf. Two stakes will be needed in places where there will be a break in the material, but the second one can be put in later when you know where the break will be.
Place the border in the trench. This step is pretty easy and straight forward. You want the material on the turf side. You'll then attach the material to the stakes to hold it down and in place. If you find spots where the border sticks up above the grass line, dig some dirt out to make it sit slightly below.
Fill in the dirt. This is why you want to keep the dirt near where you dug the trench. You'll be able to just push it over and fill in the area and cover the board. You shouldn't worry if the dirt sticks up a bit but do try to pack it down with your foot or a packer tool. Once it is settled you can add decorative rocks or other border material to make it look nice.
It's not hard to make a nice border to keep the weeds from growing into the flower bed or decorative rocks. After you've dug the trench and put in the border, you'll be well on your way to creating a great looking landscaped yard. Having a border between areas is essential to keeping it looking great over time.
About the Author:
Get great tips for choosing a plastic bender board supplier and more info about a reputable supplier at http://www.bestedging.com right now.
No comments:
Post a Comment